Technical

Automation and Control in Wire Rod Mill

Automation and Control in Wire Rod Mill Steel wire rods are the key product of steel industry and have multiple ...
Read More
/ automation and control, CCC, CCT, Flow curve, HART, HMD, HMI, IDC, Loop control, Material tracking, Minimum tension control, PLC, Process model, R factor, Technical, TTT, wire rod mill

Automation and Control System of Reheating Furnaces

Automation and Control System of Reheating Furnaces The reheating furnace is one of the key equipments in a hot rolling mill ...
Read More
/ automation and control, Black box model, CFD model, CPU, DCS, DDC, Heating zones, Medelling, PID control, Pre-heating zone, process control, Reheating furnace, Semi-empirical model, Soaking zones, Technical

Characteristic Features of Rotary Kilns

Characteristic Features of Rotary Kilns A rotary kiln is a cylinder which rotates around its cylindrical axis and acts as ...
Read More
/ Bed disturber, Burner, Dams, Direct fired rotary kiln, Drive assembly, Indirect fired rotary kiln, Long dry kiln, Rotary kiln, shell, Short dry kiln, Technical, Wet kiln

Ammonia Recovery from Coke Oven Gas

Ammonia Recovery from Coke Oven Gas The coke oven by-product plant is an integral part of the by-product coke making ...
Read More
/ Ammonia, Ammonia still, ammonium sulphate, byproduct, Catalytic ammonia destruction, Centrifuge, coke oven gas, Distillation, Flushing liquor, Incineration, Phosam process, Saturator, Technical, Water wash process

Inspection and Testing

Inspection and Testing Inspection is an organized examination or formal evaluation exercise. In production, it involves the measurements, tests, measuring ...
Read More
/ Calibration, inspection, measurement, Measuring and test equipment, NDE, NDT, quality control, standard, Technical, testing, Tolerance, Traceability

Nozzle Clogging

Nozzle Clogging The disorder of casting process because of nozzle clogging is a long-standing issue ever since the continuous casting ...
Read More
/ Deoxidation products, Inclusional clogs, mould, Nozzle build up, Nozzle clogging, Nozzle design, Refractory compatibility, SEN, Technical, Thermal clogs, Tundish

Ladle slag and its role in secondary steelmaking

Ladle slag and its role in secondary steelmaking Presently the production of liquid steel takes place in two stages. The ...
Read More
/ fluxes, Ladle slag, Secondary steelmaking, Slag balance, Slag basicity, Slag carry over, Slag component, slag conditioning, Slag fluidity, Slag forming, Slag volume, Steel ladle, Technical

Cooling of Strip on Run out Table in a Hot Strip Mill

Cooling of Strip on Run out Table in a Hot Strip Mill Hot strip mill is used to produce hot ...
Read More
/ Air cooling, Boiling curves, Coiling temperature, Down coiler, finishing mill, hot strip mill, Impingement zone, jet cooling, Laminar cooling, Run out table, Spray nozzles, Technical, Water curtain

Electric Arc Furnace Cooling System

Electric Arc Furnace Cooling System The history of electric arc furnace (EAF) steelmaking is not very old. It is only ...
Read More
/ Cooling system, Copper panels, EAF, Electric arc furnace, Heat flux, Technical, UHP, Water cooled panels, WCP

Steelmaking in Electric Arc Furnace

Steelmaking in Electric Arc Furnace Though De Laval had patented an electric furnace for the melting and the refining iron ...
Read More
/ Chemical energy, dehosphorization, deslagging, DRI, EAF steelmaking, Eccentric bottom tapping, Electric arc furnace, Foaming slag, HBI, Metallics, scrap, Technical, UHP EAF

Important aspects of design of Blast Furnace and associated ancillary equipments

Important aspects of design of Blast Furnace and associated ancillary equipments The design of the blast furnace (BF) proper and ...
Read More
/ Bell type top, BF cooling system, BF design, BF layout, BF stock house, blast furnace, cast house, Charging conveyor, ell less top charging, Gimbal top, hearth, Hoisting system, Plate cooling, Skip car, Stave cooling, Technical

Blast Furnace Slag and its Role in Furnace Operation

Blast Furnace Slag and its Role in Furnace Operation The importance of blast furnace (BF) slag in achieving smooth operation ...
Read More
/ blast furnace, Blast Furnace Slag, Final slag, Granular zone, Hearth slag, Oxide system, Primary slag, Slag basicity, Slag structure, Technical

Effect of Inclusions on the Properties of Steel

Effect of Inclusions on the Properties of Steel Steel is a versatile material which is having very wide applications. It ...
Read More
/ Anisotropy, CTE, HIC, Inclusion growth, Inclusion phenomena, Inclusion shape, inclusions, Technical

Inclusions in Continuous Cast Steel and their Detection

Inclusions in Continuous Cast Steel and their Detection  Continuous casting of steel is an important process for the production of ...
Read More
/ Continuous cast steel, Endogenous inclusions, Exogenous inclusions, Inclusion detection, inclusions, Precipitated inclusions, Technical

Inclusions in Steel and Secondary Steelmaking

Inclusions in Steel and Secondary Steelmaking Non-metallic inclusions, (hereinafter referred to as ‘inclusions’), are chemical compounds consisting of at least ...
Read More
/ Alumina clusters, Calcium treatment, clean steel, deoxidation, inclusions, Ladle treatment, Nucleation, Secondary steelmaking, Technical

Voluntary support and help is solicited for the maintenance of the website

In case of Indian donors who want to donate by bank transfer, bank details can be provided on request . Go To Contact Us Page To Request My Bank Details

  • 11136% Funded
  • $1,007,776 Raised
  • $9,050 Required
Donation Amount

Voluntary support and help is solicited for the maintenance of the website

$
Select Payment Method
Personal Info

Billing Details

Donation Total: $5

In case of Indian donors who want to donate by bank transfer, bank details can be provided on request . Go To Contact Us Page To Request My Bank Details